• Shop
    • Luminaires acoustiques
    • Luminaires suspendus
    • Mobilier acoustique
    • Séparateurs d'espace
    • Lampes de bureau
    • Solutions murales
    • Plaques murales acoustiques
    • Fauteuils
    • Cabines acoustiques
  • A propos
  • Espace Revendeurs
  • Contact
Free delivery on orders over €500 excl. VAT European manufacturer · direct sales
Acoustic simulatorSimulator +32 (0)87 84 10 26
EN ▾
  • FR Français
  • DE Deutsch
  • NL Nederlands
  • EN English
  • IT Italiano
Wisecom Acoustic
Walls Ceilings Dividers Lighting Colours Professionals Contact
0
Walls →Ceilings →Dividers →Lighting →Colours →Professionals →Contact →My account →
0 Basket (0) 0.00
Shopping Cart (0)
There is no product
Subtotal 0.00
Shipping
Checkout
Home/Blog/Advice & Expertise

Advice & Expertise · Buying Guides & Comparisons

Class A sound absorption: what does it mean?

Published on 8 July 2026·By Jonathan Rousseau·4 min read

    The term "Class A" often appears on acoustic panel data sheets, yet it is not always clearly explained. It is, however, one of the most useful indicators for objectively comparing sound absorption products before making a choice. Here is what it actually means, how it is measured, and why it matters for your commercial projects.

    The sound absorption coefficient in brief

    When a sound wave hits a surface, part of it is reflected and part of it is absorbed. The sound absorption coefficient, written as alpha (αw when it is a weighted value across several frequencies), expresses the proportion of sound energy absorbed by a material rather than reflected back into the room. A coefficient close to 0 means the surface reflects almost all the sound (like bare concrete or glass). A coefficient close to 1 means it absorbs almost all the sound energy that strikes it.

    How is this coefficient measured?

    Measurement takes place in a laboratory, usually in a reverberation chamber, across several frequency bands representative of speech and common ambient noise (from low to high frequencies). The result is then weighted using a standardised method to obtain a single value that can be compared from one product to another, whatever the manufacturer.

    Where the letter classification comes from

    To make this technical data easier to read, sound-absorbing materials are grouped into classes, from A to E (sometimes shown as "unclassified"). Class A corresponds to the highest absorption coefficients, generally above 0.90 across the tested frequency range. At the other end of the scale, Class E corresponds to materials with little absorption, close to pure reflection.

    Why Class A is sought after in commercial spaces

    In an office, a meeting room or a retail space, the aim of acoustic treatment is to reduce the reverberation time, in other words the time it takes for a sound to die away in a room. The more effectively the materials in the room absorb sound (Class A or B), the less surface area needs to be treated to achieve a noticeable result. It is a relevant selection criterion when the available surface is limited, for example a single section of wall or a strip of ceiling. Our acoustic wall panels are designed to deliver a high level of absorption with a reduced visual footprint, so you can treat a room effectively without covering more and more surfaces.

    The same issue arises in a specific way in restaurants, where acoustic comfort also intersects with regulatory requirements specific to ERPs (French establishments open to the public) - we cover this in our article on restaurant acoustics and the regulations.

    Absorption does not mean soundproofing

    This is the most common confusion: Class A relates to sound absorption, not soundproofing. A highly absorbent panel reduces reverberation and ambient noise inside a room, but it does not block sound from travelling into the next room or outside. Soundproofing depends on other factors (mass of the walls, airtightness, double glazing...). If you need to stop noise passing through a partition wall, a panel's absorption class is not the main indicator to look at; you should instead focus on the sound reduction index of the wall itself.

    Where to find highly absorbent products

    The format of a product also affects how well it performs in practice. Acoustic wall tiles let you create bespoke patterns while keeping a continuous absorbent surface, which is useful when you want to combine performance and visual identity. For the ceiling, which is often the largest reflective surface available in an office or open-plan office, acoustic ceiling tiles for suspended ceilings allow you to treat a large area without encroaching on walls or furniture.

    How to check a product's Class A rating before buying

    Before comparing two products on their trade name alone, it is best to ask for the full technical data sheet: it should state the measured αw coefficient, the corresponding class and the test method used. A "Class A" claim that is not backed up by figures is worth checking, because the test conditions (material thickness, air gap behind the panel, type of installation) strongly influence the final result on site, beyond the laboratory figure.

    In summary

    Class A is a reliable benchmark for objectively comparing sound absorption products, but it does not replace an analysis of your space: the area to be treated, how the room is used, installation constraints and budget remain the criteria that guide the right choice. Feel free to tell us about your project so we can identify the solution best suited to your layout.

    Advice & ExpertiseBuying Guides & Comparisons

    Further reading

    Advice & Expertise · Installation Tips

    5 Mistakes to Avoid When Installing Acoustic Wall Panels

    Avoid costly mistakes when installing acoustic wall panels! Discover the 5 most common pitfalls that undermine the effectiveness of your acoustic treatment. From the initial acoustic survey…

    Read the article7 March 2026

    Advice & Expertise · Buying Guides & Comparisons

    Acoustic ceiling solutions: ceiling tiles vs hanging acoustic panels compared

    Integrated ceiling tiles or hanging panels? Read our detailed comparison of acoustic ceiling solutions. Performance, aesthetics and costs: every criterion you need to choose the best…

    Read the article7 March 2026

    Advice & Expertise

    Acoustic lights: combining lighting and acoustic treatment

    Discover acoustic lights, the innovative solution that is transforming interior design by combining high-performance lighting with acoustic treatment. These multifunctional fittings make…

    Read the article7 March 2026

    How many panels does your space need?

    Enter the room type and its floor area: the estimator calculates the panel area you will need.

    Estimate my needs →

    Wisecom Acoustic

    European manufacturer of decorative acoustic solutions in recycled PET felt.

    Mitoyenne 414, 4710 Lontzen, Belgium
    +32 (0)87 84 10 26
    Monday to Friday, 9:00 to 17:00

    Collections

    Acoustic wall panelsAcoustic wall mosaicsHanging acoustic panelsAcoustic ceiling tilesHanging acoustic dividersAcoustic lights Pendant lights

    Professionals

    Submit a projectReseller areaCatalogues and documentsSamplesGlossaryJournal

    Information

    About usDelivery and returnsPayment methodsTerms and conditions of saleLegal noticePrivacy policy
    © 2026 Wisecom Acoustic™ · a brand of Wisecom Group SRL · VAT BE0641.740.320 Prices shown excl. VAT