Acoustics glossary
No terms match your search. Try another word, or browse the letters below.
A
- Sound absorption
Sound absorption refers to a material's ability to reduce the reflection of sound waves. It is essential for improving acoustic comfort by limiting reverberation and echo. Absorbent materials such as rock wool, acoustic foam and felt panels are used in a wide range of settings, including offices, recording studios and restaurants. Good absorption reduces listening fatigue and improves speech intelligibility.
- Sound reduction
Sound reduction is the decrease in sound intensity as sound travels through a material or space. It is essential for reducing noise transmission between different rooms or buildings. Acoustic partitions, special glazing and soundproof doors are effective solutions for improving sound reduction in commercial and residential spaces.
- αw (Alpha w) - Sound absorption coefficient
The αw (Alpha w) coefficient is a standardised value that measures a material's ability to absorb sound. It ranges from 0 (no absorption) to 1 (total absorption), making it possible to quantify how effective a material is at reducing reverberation and noise nuisance.
This coefficient is determined according to ISO 11654, which classifies absorbent materials into five categories: A (highly absorbent), B, C, D and E (slightly absorbent). A material with an αw close to 1 is particularly effective for sound absorption, such as rock wool panels or acoustic foams.
When designing the acoustics of workspaces, restaurants or auditoriums, it is essential to choose materials with an αw suited to your noise reduction and speech intelligibility requirements. For example:
- Felt acoustic panels: αw ≈ 0.85 - 0.95 (highly absorbent).
- Acoustic ceilings: αw ≈ 0.60 - 0.90 (reduced reverberation).
- Rugs and thick carpets: αw ≈ 0.30 - 0.50 (moderate absorption).
- Concrete and hard surfaces: αw ≈ 0.05 - 0.10 (very low absorption, encouraging reverberation).
Choosing materials with an optimised αw improves the acoustic comfort of a space by reducing echo and limiting unwanted noise nuisance.
- Acoustic design
Acoustic design covers all the techniques and equipment used to optimise the acoustic comfort of a space. This includes installing absorbent panels, acoustic ceilings and noise-reducing curtains. Good acoustic design is crucial in open-plan offices, restaurants and schools to ensure better intelligibility and reduce noise nuisance.
- Sound amplification
Sound amplification is the increase in the intensity of a sound signal using an amplifier. In large performance venues, auditoriums or lecture theatres, a good amplification system is needed to distribute sound evenly without creating echo or distortion. Suitable acoustic treatment helps optimise the effectiveness of amplification systems.
- A·PET®
A·PET®, available in 9 mm and 18 mm, is a high-quality sound absorber, with an Alpha W (αw) value, which measures a material's ability to absorb the energy of a sound wave, of up to 1.00, and an NRC (Noise Reduction Coefficient) of up to 0.95. This versatile material can be used for acoustic ceilings, walls, desks or as space dividers.
- Noise attenuation
Noise attenuation refers to the techniques used to reduce the spread of unwanted sound. This can be achieved through soundproofing (preventing noise from travelling from one room to another) or acoustic treatment (reducing echo and reverberation within a space). Common solutions include acoustic panels, sound-absorbing ceiling tiles and suitable floor coverings.
- Audiometry
Audiometry is the science of measuring human hearing. In a workplace context, it is used to identify acceptable noise levels and assess the impact of noise on hearing health. Audiometric tests are often carried out in noisy industries to ensure compliance with acoustic standards and to protect workers.
- Sound ambience
Sound ambience refers to all the sounds perceived in a given environment. It can be influenced by acoustic design and by the presence of absorbent or reflective materials. Managing sound ambience well is essential for creating a pleasant atmosphere in public spaces, shops and offices.
- Anechoic
An anechoic chamber is a space specially designed to eliminate all sound reflection and reverberation. These rooms are used to test audio equipment or to carry out acoustic research. Anechoic chambers are also useful for assessing the effectiveness of soundproofing materials.
- Speech articulation
Speech articulation is an acoustic criterion that measures the clarity and intelligibility of spoken sounds in a given space. Poor articulation caused by high reverberation or background noise can hinder understanding, particularly in meeting rooms, schools and auditoriums. Solutions such as acoustic panels and ceiling absorbers help improve speech intelligibility.
B
- Acoustic baffles
Acoustic baffles are suspended elements used to reduce reverberation in large, resonant spaces such as sports halls, open-plan offices or industrial halls. Their design allows effective absorption of sound waves while letting light and air pass through, making them an ideal solution for improving acoustic comfort without disrupting ventilation or lighting.
C
- Acoustic treatment
Acoustic treatment covers all the techniques aimed at improving how sound behaves in a space by reducing reverberation and unwanted echoes. It relies on installing absorbent materials such as acoustic panels, sound-absorbing curtains, dedicated ceiling tiles or suitable floor coverings. Effective acoustic treatment is essential in offices, restaurants, conference rooms and auditoriums to ensure good intelligibility and optimum acoustic comfort.
- Sound absorption coefficient
The sound absorption coefficient is a measurement that indicates a material's ability to absorb sound waves. Expressed on a scale from 0 (no absorption) to 1 (total absorption), this coefficient helps you choose the most suitable materials for reducing reverberation. For example, thick carpet or rock wool panels have high coefficients, making them ideal solutions for improving the acoustic comfort of indoor spaces.
- Acoustic enclosure
An acoustic enclosure is a device used to isolate or contain the noise produced by loud equipment (generators, air conditioning, pumps, etc.). Made from absorbent and soundproofing materials, it effectively reduces noise levels in industrial or commercial environments.
- Acoustic partition
An acoustic partition is a divider designed to limit sound transmission between two spaces. It can be fixed or movable and is usually made of absorbent materials such as rock wool, high-density plasterboard or soundproofing fabric panels. Acoustic partitions are particularly useful in open-plan offices, meeting rooms and recording studios.
- Acoustic booth
Acoustic booths are enclosed structures designed to shut out ambient noise and provide a quiet space, particularly in offices or factories. They create focus areas in open-plan offices, improve the privacy of phone calls and protect workers exposed to high noise levels.
- Subwoofer
A subwoofer is a loudspeaker specially designed to reproduce low frequencies (generally below 100 Hz). In sound system installations, careful subwoofer placement and good management of low frequencies are essential to avoid unwanted resonance and ensure a balanced sound.
- Acoustic comfort
Acoustic comfort refers to the sound quality perceived by the occupants of a given space. It depends on several factors, such as reducing ambient noise, controlling reverberation and optimising speech intelligibility. Good acoustics improve concentration, reduce stress and contribute to a better quality of life, particularly in offices, restaurants and schools.
- Acoustic conductivity
Acoustic conductivity is a material's ability to transmit sound vibrations. Some materials, such as metal or glass, are good acoustic conductors, while others, such as rock wool or felt, have strong absorption properties. In the acoustic design of a building, it is essential to take the acoustic conductivity of materials into account to limit the unwanted spread of noise.
- Acoustic shell
An acoustic shell is a casing designed to contain the noise produced by an item of equipment (generator, pump, industrial machine) while ensuring adequate ventilation. These devices are often used in industry and the commercial sector to limit noise pollution while maintaining optimum energy efficiency.
- Sound clarity
Sound clarity refers to a space's ability to reproduce sounds faithfully without distortion or loss of intelligibility. An overly reverberant or acoustically unbalanced environment can impair this clarity, particularly in conference rooms, auditoriums and recording studios. Suitable acoustic treatment with absorbent panels and diffusers helps optimise sound clarity.
D
- Sound diffusion
Sound diffusion refers to the even distribution of sound waves throughout a space, to avoid build-ups of sound in some areas and dead spots in others. Unlike absorption, which attenuates sound, acoustic diffusers scatter sound waves in a more balanced way. This technique is used particularly in auditoriums, music studios and home cinemas to provide better spatial sound.
- DIN EN ISO 11654 - Classification of sound absorbers
DIN EN ISO 11654 is an international standard used to classify acoustic materials according to their ability to absorb sound. This classification is based on a "sound absorption class", which indicates how effective the material is at reducing reverberation.
Materials are classified into five categories:
- Class A: Highly absorbent.
- Class B: High absorption.
- Class C: Moderate absorption.
- Class D: Low absorption.
- Class E: Very low absorption.
A Class A material is particularly recommended for spaces requiring strong acoustic control, such as open-plan offices, auditoriums and recording studios.
When a product states VOC Emissions DIN EN ISO 11654, this means that it meets low volatile organic compound (VOC) emission standards and has been classified under this standard for its sound absorption capacity.
E
- Echo
Echo is an acoustic phenomenon that occurs when sound reflects off a hard surface and returns with a delay that the human ear can perceive. It can be disruptive in large spaces such as auditoriums, airport halls and sports halls, as it impairs speech intelligibility and sound quality. Installing absorbent materials, such as acoustic wall panels or heavy curtains, helps limit this phenomenon and improve acoustic comfort.
- Acoustic screen
An acoustic screen is an element used to block or reduce the spread of sound between different areas. It can be installed outdoors (noise barriers for roads and railways) or indoors (movable partitions, dividing screens in open-plan offices). These screens are made from absorbent and reflective materials and effectively reduce noise nuisance.
- Sound energy
Sound energy represents the amount of acoustic power emitted by a sound source and is measured in watts. Managing this energy effectively is essential in public and commercial spaces to limit noise nuisance. Acoustic solutions such as sound-absorbing ceilings and wall panels help better control the spread of this energy and optimise the listening experience.
- Acoustic environment
The acoustic environment refers to the sound characteristics of a space, whether indoors or outdoors. It takes into account the level of ambient noise, reverberation, sound clarity and sound transmission. In an acoustically well-designed space, unwanted noise is attenuated and spoken communication is improved, particularly in offices, restaurants and meeting rooms.
- VOC emissions (Volatile Organic Compounds)
VOC emissions (Volatile Organic Compounds) refer to the chemical substances released into the air by certain materials and products, such as paints, adhesives, varnishes, acoustic foams, wood panels and other building materials. These compounds can affect indoor air quality and pose health risks.
The health effects of VOCs can include:
- Irritation of the eyes, nose and throat.
- Headaches, dizziness and nausea.
- Respiratory problems and allergies in the event of prolonged exposure.
- Some VOCs are classified as carcinogenic (e.g. formaldehyde, benzene).
In acoustics, some absorbent or insulating materials may contain VOCs. To ensure a healthy indoor environment, it is recommended to choose low-VOC materials certified by environmental labels such as:
- A+ label (France): classification of VOC emissions from construction products.
- Greenguard: certification for low-VOC materials.
- LEED (Leadership in Energy and Environmental Design): international standard covering indoor air quality.
Modern acoustic solutions, such as eco-friendly acoustic panels and solvent-free wall coverings, are designed to meet these standards and provide acoustic comfort while preserving indoor air quality.
- Sound emission
Sound emission refers to the amount of sound emitted by a given source. Some industrial equipment, such as motors or ventilation systems, generates high noise levels that must be controlled to avoid noise pollution. Using absorbent materials and soundproofing devices helps reduce these emissions and improve acoustic comfort.
- Acoustic sealing
Acoustic sealing is the ability of a material or structure to prevent sound from passing from one space to another. It is crucial in the soundproofing of buildings, particularly to limit noise from neighbours or to improve privacy in meeting rooms. Acoustic seals, soundproofed doors and dedicated glazing can be installed to improve the acoustic sealing of a space.
- Sound balance
Sound balance refers to the harmonious distribution of different sound frequencies in a given environment. Good sound balance is essential in commercial spaces, recording studios and concert halls to ensure faithful sound reproduction without distortion or areas of strong resonance. Using acoustic diffusers and absorbent panels helps improve this balance.
- Equalisation
Equalisation is a process that involves adjusting the levels of different sound frequencies to achieve a more harmonious result. It is used in sound reinforcement and architectural acoustics to correct the acoustic imbalances of a room. Suitable acoustic treatment, combined with good equalisation, helps optimise sound quality in performance venues and auditoriums.
- Acoustic event
An acoustic event is a sound phenomenon detectable by the human ear, such as a sudden noise, a vibration or a change in frequency. In commercial and industrial environments, it is essential to identify and manage these events to ensure good acoustic comfort. Sound sensors and acoustic treatments can be put in place to monitor and limit unwanted sound disturbances.
- Sound expansion
Sound expansion is the propagation of sound within a given space. Depending on the nature of the materials and the architecture of the venue, this expansion can be controlled to avoid resonance and ensure better intelligibility. In large spaces such as conference rooms and auditoriums, installing reflective panels and diffusers is necessary to control sound expansion.
F
- Sound frequency
Sound frequency is the number of oscillations per second of a sound wave, measured in Hertz (Hz). It determines the pitch of a sound: low frequencies (20-250 Hz) are associated with deep sounds, while high frequencies (above 2,000 Hz) correspond to high-pitched sounds. Good frequency management is essential in acoustic design to avoid unwanted resonance and ensure optimum sound clarity.
G
- Acoustic ductwork
Acoustic ducts are designed to reduce noise transmission through ventilation and air conditioning systems. They are often made with absorbent materials such as rock wool and help minimise noise nuisance in offices, hospitals and industrial buildings. Installing them is essential to meet acoustic standards in workplaces and residential areas.
H
- Pitch
Pitch is an auditory perception linked to the frequency of sound vibrations. A high-pitched sound corresponds to a high frequency, while a low-pitched sound is produced by a lower frequency. In professional and commercial environments, managing pitch helps improve acoustic comfort by avoiding frequencies that are too harsh or unpleasant to the human ear.
I
- Soundproofing
Soundproofing refers to the techniques used to prevent sound from passing between two separate spaces. It relies on soundproofing materials such as plasterboard partitions with mineral wool, acoustic glazing or insulating panels. Unlike acoustic treatment, which deals with reverberation inside a room, soundproofing aims to block outside noise and prevent noise nuisance from travelling through walls, ceilings and floors.
J
- Acoustic junction
An acoustic junction is a connection point between different building elements (walls, floors, ceilings) where sound can travel through vibration. To limit this unwanted transmission, it is recommended to use resilient joints, sealing strips and absorbent materials. Managing acoustic junctions properly improves the soundproofing of buildings and avoids the acoustic bridges that allow noise to spread.
K
- Kilohertz (kHz)
The kilohertz (kHz) is a unit of sound frequency equal to 1,000 Hertz (Hz). In acoustics, sounds audible to the human ear generally lie between 20 Hz and 20 kHz. Managing frequencies, particularly in music and professional environments, helps optimise sound clarity and reduce noise nuisance in workplaces, concert halls and recording studios.
L
- Acoustic panelling
Acoustic panelling is a wall or ceiling covering designed to improve sound absorption while adding an aesthetic touch to interior spaces. Made from wood, polyester fibres or other absorbent materials, it is used in offices, meeting rooms and schools to limit reverberation and ensure optimum acoustic comfort.
- Noise limit
The noise limit is the maximum acceptable level of noise nuisance in a given environment. This limit is set by national or international regulations to protect people's hearing health. In the workplace, keeping within these thresholds is essential to avoid listening fatigue and improve working comfort.
- Acoustic line
An acoustic line is a configuration optimised for the even distribution of sound waves in a given space. It is used in the design of loudspeakers and sound systems to ensure a balanced distribution of sound without creating areas of excessive concentration.
- Acoustic regulations
Acoustic regulations refer to all the rules and standards governing the management of noise and sound in public and professional spaces. They set noise tolerance thresholds for offices, schools and housing, and define requirements for soundproofing and sound absorption materials.
- Acoustically optimised home
An acoustically optimised home is a space designed or adapted to offer maximum acoustic comfort by reducing outside and inside noise. It often includes absorbent materials, acoustic double-glazed windows and soundproofed doors to minimise noise transmission.
- Acoustic lens
An acoustic lens is a device used to amplify sound in a specific direction, often used in hearing assistance technologies or directional sound systems. It focuses a sound signal towards a listener without disturbing the overall sound environment.
- Acoustic light
An acoustic light is a lighting fixture that also provides sound absorption. Designed with absorbent materials, it reduces reverberation while providing effective lighting. These lights are used particularly in open-plan offices, meeting rooms and public spaces to combine aesthetics, visual comfort and improved acoustic well-being.
- Soundproofed plant room
A soundproofed plant room is a room designed to house noisy equipment, such as motors or ventilation systems, while minimising its noise impact on the surrounding environment. It is built with absorbent and insulating materials to limit the spread of noise.
- Larsen effect (audio feedback)
The Larsen effect is a sound effect produced by a feedback loop between a microphone and a loudspeaker. This phenomenon creates an unpleasant high-pitched sound and is often caused by poor positioning of audio equipment or poor frequency management. Acoustic treatments can be put in place to limit this effect.
- Sound wavelength
Sound wavelength is the distance travelled by a sound wave during one period of vibration. It varies according to the frequency of the sound: low-pitched sounds have a longer wavelength than high-pitched sounds. Taking this characteristic into account is essential when designing acoustic spaces to ensure good sound distribution.
M
- Absorbent materials
Absorbent materials are designed to reduce the reflection of sound waves and limit reverberation in a space. They are widely used in the acoustic design of offices, restaurants and recording studios. Among the most effective materials are rock wool, acoustic foam, acoustic fabrics and felt panels.
N
- Acoustic standards
Acoustic standards define the minimum requirements for noise and acoustic comfort in buildings and public spaces. They vary by country and by use (residential, commercial, industrial). In France, for example, acoustic regulations set maximum noise thresholds in offices, schools and hospitals to improve the quality of life and productivity of occupants.
- NRC (Noise Reduction Coefficient)
The NRC (Noise Reduction Coefficient) is a measure of a material's ability to absorb sound. Expressed as a number between 0 and 1, it represents the fraction of sound energy absorbed by a material when a sound wave strikes it.
Interpreting NRC values:
- NRC of 0: the material has no sound absorption and reflects 100% of the sound.
- NRC of 1: the material absorbs 100% of sound waves, meaning total absorption.
- NRC of 0.80: the material absorbs 80% of the sound and reflects 20%.
Materials with a high NRC (above 0.7) are used in environments requiring effective acoustic control, such as open-plan offices, meeting rooms, auditoriums and restaurants. They help reduce reverberation, improve speech intelligibility and minimise echo.
Acoustic panels, sound-absorbing ceiling tiles, thick carpets and acoustic foams are examples of materials with a high NRC.
The NRC is measured according to standards such as ASTM D5116, which is used to assess the volatile organic compound (VOC) emissions of acoustic materials used indoors.
O
- Sound wave
A sound wave is a mechanical vibration that travels through a medium (air, water, solid) in the form of longitudinal waves. In acoustics, these waves are the source of the sounds we hear. Their propagation and interaction with surfaces influence the acoustic quality of a space. The acoustic design of a venue involves controlling these waves to limit excessive reverberation and improve sound clarity.
P
- Acoustic panel
An acoustic panel is an absorbent element designed to improve the acoustics of a space by reducing reverberation and noise nuisance. It can be wall-mounted, suspended or built into furniture. Made from rock wool, acoustic foam or stretched fabric, it is used in offices, restaurants and meeting rooms to optimise acoustic comfort and limit echo.
- PES (Polyethersulfone) - High-performance thermoplastic
PES (Polyethersulfone) is a high-performance thermoplastic polymer known for its high thermal and mechanical resistance. It is used in applications requiring dimensional stability and resistance to high temperatures over long periods.
The main characteristics of PES include:
- High-temperature resistance: it retains its mechanical properties even at high temperatures.
- Excellent rigidity and mechanical strength: it withstands heavy loads without deforming.
- Low susceptibility to stress cracking: unlike other plastics, it does not crack easily under stress.
- Good chemical resistance: it resists solvents, hydrocarbons and aggressive chemicals.
- Excellent dimensional stability: it does not expand or contract significantly when exposed to heat.
PES is widely used in several sectors, including:
- Acoustics industry: manufacture of loudspeaker membranes and acoustic panels.
- Medical sector: components for surgical instruments and sterilisable equipment.
- Aerospace and automotive: parts requiring high resistance to heat and mechanical stress.
- Electronics: high-performance insulators and connectors.
Thanks to its properties, PES is a preferred material in acoustic solutions, particularly for manufacturing acoustic membranes and components that withstand high temperatures.
Q
- Sound quality
Sound quality refers to the overall perception of sound in a space, including clarity, frequency balance and the absence of noise nuisance. Good sound quality is essential in workplaces, auditoriums and shops, where controlled acoustics aid concentration and improve the user experience. Installing suitable acoustic solutions, such as absorbent panels and diffusers, helps improve this quality.
R
- Reverberation
Reverberation is the phenomenon whereby a sound persists in an enclosed space after its source has stopped, due to multiple reflections off the surrounding surfaces. Excessive reverberation can impair speech comprehension and acoustic comfort, particularly in offices, conference rooms and restaurants. To control it, absorbent materials such as acoustic panels, carpets and suspended ceilings are used.
S
- Acoustic solution
An acoustic solution covers all the devices and techniques aimed at improving the acoustic comfort of a space. This can include wall panels, acoustic ceilings, sound-absorbing curtains or acoustic furniture. These solutions are essential for reducing reverberation and limiting the spread of noise, particularly in open-plan offices, restaurants and meeting rooms.
T
- Room acoustic treatment
Room acoustic treatment refers to all the methods used to optimise the propagation and absorption of sound waves in a space. It relies on installing absorbent materials and sound diffusers to limit echo, reverberation and unwanted noise nuisance. This approach is essential in venues requiring optimum intelligibility, such as recording studios, theatres and schools.
U
- Ultrasound
Ultrasound refers to sound waves with a frequency above the upper limit of human hearing, generally above 20 kHz. Although of no use for improving the acoustics of commercial spaces, ultrasound plays an important role in industrial, medical and scientific fields. In building acoustics, some technologies use ultrasound to detect air leaks or insulation defects.
- UNE-EN ISO 354:2004 - Measurement of sound absorption
UNE-EN ISO 354:2004 is an international standard that defines the procedure for measuring the sound absorption of materials in a reverberation room. It is essential for assessing the ability of acoustic materials (panels, coverings, absorbent foams) to reduce noise in enclosed spaces.
The elements of the standard's name are as follows:
- UNE: Standard approved by the Asociación Española de Normalización.
- EN: Harmonised European standard.
- ISO: Standard meeting the criteria of the International Organization for Standardization.
- 354: Unique reference number of the standard.
- 2004: Year of publication or update.
This standard is particularly useful for manufacturers and designers of acoustic solutions, as it helps ensure that products meet quality and performance standards for sound control.
By measuring sound absorption in a reverberation room, this standard provides an accurate assessment of material performance before installation in environments requiring acoustic treatment.
V
- Acoustic vibration
Acoustic vibration is a mechanical oscillation generated by a sound wave in a given medium (air, solid, liquid). In buildings, some vibrations can cause structure-borne noise that travels through walls and floors. Installing dedicated insulation helps dampen these vibrations and reduce unwanted noise nuisance.
W
- Acoustic watt
The acoustic watt is a unit of measurement for the sound power emitted by a source. In commercial and industrial environments, managing the sound power of equipment is essential to avoid noise nuisance. Using absorbent materials and suitable acoustic solutions helps keep these noise levels under better control.
X
- Xylophone and acoustics
The xylophone is a percussion instrument that perfectly illustrates how sound waves travel through solid materials. In architectural acoustics, studying these phenomena helps optimise the distribution of frequencies in a space, particularly in auditoriums and concert halls.
Y
- Acoustic yin and yang
The concept of yin and yang applied to acoustics refers to the balance between sound absorption and sound reflection in a given space. Good acoustic design is not just about eliminating all reflected sound, but rather about harmonising the sound environment for a better listening experience, whether in offices, hotels or meeting rooms.
Z
- Optimum listening zone
An optimum listening zone is an area where the acoustic design allows clear and balanced perception of sound. It is particularly sought after in recording studios, cinemas and auditoriums. The layout of the speakers, the control of reverberation and the use of diffusers play a key role in creating these zones.
